IMAX B8 Sold Out
The IMAX 8B is the latest incarnation from the IMAX range.
It comes with all the features of the B6 but in a mega 8 cell charging capacity package!
Charge all your favourite packs including A123s (LiFe) as well as balance, cycle and discharge.
The IMAX 8B is the latest incarnation from the IMAX range.
It comes with all the features of the B6 but in a mega 8 cell charging capacity package!
Charge all your favourite packs including A123s (LiFe) as well as balance, cycle and discharge.
Spec.
Operating voltage range: 10.0~18.0Volt
Circuit power: max. 150W
Charge current range: 0.1~7.0A
Discharge current range: 0.1~5.0A
Current drain for balancing Li-Po: 300mAh/cell
NiCd/NiMH battery cell count: 1~27 cells
Lithium bettery cell count: 1~8 Series
Pb battery voltage: 2 to 36V
Weight: 574g
Dimensions: 170X110X35mm
IMAX B6 free shipping
This product is a rapid chargerwith a high performance microprocessor and specialized operating software.
Please read this entire operating manual completely and attentively before using this product, as it covers a wide range of information on operating and safety. Or please do use this product in company with a specialist!
* Operating voltage range:DC11.0~18.0 Volt/AC to DC adaptor (DC11.0~18.0V/5A)
* Circuit power: Max. charge power 50W/Max. discharge power5W
* Charge current range:0.1~5.0A
* Discharge current range:0.1~1.0A
* Current drain for balancing Li-po:300mAh/cell
* NiCd/NiMH battery cell count:1~15cell
* li-ion/Polymer cell count:1~6 series
* Pb battery voltage:2V~20V
* Weight:277g(Net Weight)
* Dimensions:133*87*33mm
* Maximum safety
* Delta-peak sensitivity
The automatic charge termination program based on the principle of the
* Delta-peak voltage detection
When the battery's voltage exceeds the threshold, the process will be terminated automatically.
* Automatic charging current limit
You can set up the upper limit of the charging current when charging your NiCd or NiMH battery;
it is useful for the NiMH battery of low impedance and capacity in the 'AUTO' charging mode.
* Capacity limit
The charging capacity is always calculated as the charging current multiplied by time. If the
charging capacity exceeds the limit, the process will be terminated automatically when you set
the maximum value.
* Temperature threshold*
The battery's internal chemical reaction will cause the temperature of the battery to rise. If the
temperature limit is reached, the process will be terminated.
* This function is available by connecting optional temperature probe, which is not included in
our package.
* Processing time limit
You can also limit the maximum process time to avoid any possible defect.
Input power monitoring
To protect the car battery used as DC input power from being damaged, its voltage keeps being
monitored. If it drops below the lower limit, the process will be ended automatically.
* Data store/load
The maximum five batteries' data can be stored for users convenience. You can keep the data
pertaining to program setting of the battery of continuous charging or discharging. Users can
call out these data at any time without any special program setting.
POWER SUPPLY free shipping
NPUT: AC 220V 50Hz
OUTPUT: DC 12V---5A
Please read this entire operating manual completely and attentively before using this product, as it covers a wide range of information on operating and safety. Or please do use this product in company with a specialist!
* Operating voltage range:DC11.0~18.0 Volt/AC to DC adaptor (DC11.0~18.0V/5A)
* Circuit power: Max. charge power 50W/Max. discharge power5W
* Charge current range:0.1~5.0A
* Discharge current range:0.1~1.0A
* Current drain for balancing Li-po:300mAh/cell
* NiCd/NiMH battery cell count:1~15cell
* li-ion/Polymer cell count:1~6 series
* Pb battery voltage:2V~20V
* Weight:277g(Net Weight)
* Dimensions:133*87*33mm
* Maximum safety
* Delta-peak sensitivity
The automatic charge termination program based on the principle of the
* Delta-peak voltage detection
When the battery's voltage exceeds the threshold, the process will be terminated automatically.
* Automatic charging current limit
You can set up the upper limit of the charging current when charging your NiCd or NiMH battery;
it is useful for the NiMH battery of low impedance and capacity in the 'AUTO' charging mode.
* Capacity limit
The charging capacity is always calculated as the charging current multiplied by time. If the
charging capacity exceeds the limit, the process will be terminated automatically when you set
the maximum value.
* Temperature threshold*
The battery's internal chemical reaction will cause the temperature of the battery to rise. If the
temperature limit is reached, the process will be terminated.
* This function is available by connecting optional temperature probe, which is not included in
our package.
* Processing time limit
You can also limit the maximum process time to avoid any possible defect.
Input power monitoring
To protect the car battery used as DC input power from being damaged, its voltage keeps being
monitored. If it drops below the lower limit, the process will be ended automatically.
* Data store/load
The maximum five batteries' data can be stored for users convenience. You can keep the data
pertaining to program setting of the battery of continuous charging or discharging. Users can
call out these data at any time without any special program setting.
POWER SUPPLY free shipping
NPUT: AC 220V 50Hz
OUTPUT: DC 12V---5A