Servo

Hitec 7955TG 3,600

Hitec's best servo just got better. Based on the powerhouse HS-5955TG servo the HS-7955TG has the added benefit of our G2 second generation programmable digital circuit. This new circuit has twice the resolution of our original circuit while adding programmable overload protection. The HS-7955TG has been designed for the most demanding hobby applications including the largest aircraft and monster trucks. Featuring a titanic 333oz./in. of torque at 6.0 volts, all this power is harnessed by incorporating the industries first Titanium gears for incredible wear resistance and two strong hardened steel gear pins and axial brass bushing in the servo case.

Specifications:

Hitec 5245MG 1,800.00

SPECS: Wire color codes: Black-Ground, Red-Power, Yellow-Signal
 Operating speed: 0.15 sec @ 60° at 4.8V
 Torque: 61 oz-in (4.4 kg-cm)
 Weight: 1.12oz (32g)
 Length: 1.27" (32.4mm)
 Width: 0.66" (16.8mm)
 Height: 1.21" (30.8mm)
 Wire length: 12" (305mm) approximate

---

SM SERVO 16kg 1,100 free shipping
http://www.cyclonetoy.com/list_1.asp?id=1489
Package:
  Single retail package
 
 Description:
  60.0g wiith torque 15.5 kg-cm (4.8V) ; 16.8kg-cm (6.0V); Wire: 30cm

Metal Gear Servo. Double Bearing
 
 Feature:
  Futaba, JR, Sanwa and Hitec compatible.
 
 
 Important Notes:
  Specify the connector type when you purchase the servo.
Refer to the figure when installing the servo accessories.
For engine powered airplanes and boats, rubber must be used to reduce vibration.
Please choose correct model for your application.
Torque over-loaded will damage the servo's mechanism-.
Keep the servo clean and away from dust, corrosive gas and humid air.

---

Hitec 7985 3,000
 This is a Hitec Digital, High Speed, High Resolution, Metal Gear
                          Programmable Servo.

FEATURES: Coreless motor
          Ideal for high performance aircraft to 1/4 scale, .30 and larger
            helicopters, and steering and throttle for 1/10 and 1/8 scale
            vehicles
          Gold plated contacts
          Metal gears
          Dual ball bearings
          High speed
          Water and dust resistant

INCLUDES: Digital high speed servo with 12" wire and universal connector
          2" servo arm
          Heavy duty 1-1/2" servo arm
          Heavy duty 2-3/4" servo arm
          Black disc servo horn
          Four 2 x 14mm mounting screws
          Four brass eyelets
          Four black rubber vibration isolators
          Plastic case and programming instruction sheet
          Hitec decals

SPECS:    Speed: 0.16 sec/60 degrees at 4.8V
                 0.13 sec/60 degrees at 6.0V
          Torque: 144.42 oz-in at 4.8V (10.4 kg-cm)
                  172.20 oz-in at 6.0V (12.4kg-cm)
          Length:  1.57" (40mm)
          Width:   0.78" (20mm)
          Height:  1.45" (37mm)
          Weight: 2.18oz (62g)

---

 Tower pro 9G servo SG-9  350.00 php0

*Dimensions: 22*11.5*27mm
*Operating Speed (4.8V no load): 0.12sec/60 degrees
*Stall Torque (4.8V): 17.5oz/in (1.2 kg/cm)
*Temperature Range: -30 to +60 Degree C
*Dead Band Width: 7usec
Operating Voltage:3.0-7.2 Volts

use for helicopter,boat.