The Ar6200 DSM2 6-channel Receiver is a great solution for all model aircraft requiring full range up to six channels. This DuaLink® receiver simultaneously gathers information from two receivers that is processed by patent pending Spektrum software that combines it to form the most vivid picture of an RF signal. This dual path redundancy, plus the fact each of the two receivers is located in a slightly different location, exposes each to a different RF environment and creates a bulletproof RF link in all conditions.
Highlight Features: 6 channels Internal and remote receiver Patented DuaLink®technology Model Match prevents flying a model using the wrong model memory
(Feature does not work with module systems) Servo Sync. (Feature does not work with module systems) Smart Safe fail safe system US patent 7,391,320
Highlight Features: 6 channels Internal and remote receiver Patented DuaLink®technology Model Match prevents flying a model using the wrong model memory
(Feature does not work with module systems) Servo Sync. (Feature does not work with module systems) Smart Safe fail safe system US patent 7,391,320
Specifications
Spektrum DX6i AR6100E 2.4G AR6100 The AR6100E is the ultimate 2.4GHz receiver for most any small electric model from mini profile foamies to 400 class helis. It also boasts a wide input range that allows it to operate with 3.5- to 9-volt electrical systems.
Weight: 4.4 g
Size:19.0mm x 30.0mm x 9.0mm (WxLxH),
DSM2 Technology
Compatible only with DSM2 aircraft radio and module systems
6 Channel
End pin connectors
Short 30mm antennas for mounting convenience 6Ch DSM2 Receiver
Spektrum DX6i AR6100E 2.4G AR6100 The AR6100E is the ultimate 2.4GHz receiver for most any small electric model from mini profile foamies to 400 class helis. It also boasts a wide input range that allows it to operate with 3.5- to 9-volt electrical systems.
Weight: 4.4 g
Size:19.0mm x 30.0mm x 9.0mm (WxLxH),
DSM2 Technology
Compatible only with DSM2 aircraft radio and module systems
6 Channel
End pin connectors
Short 30mm antennas for mounting convenience 6Ch DSM2 Receiver
Wing Span----86.6in/2200mm;
Wing Area----94sq.dm;
Fuselage Length----85.5in/2172mm;
Flying Weight:7300----7700g;
Radio----6Channels 6Servos;
Engine----50CC
With Monokota Covering
With carbon fiber wing tube
With Carbon fiber rear lading gear
With canister channel
With high quality hard ware
Carbon Fiber Version Sbach 342 50cc ARF Plane
Wing Span: 87"(2209mm)
Length:84"(2150mm)with spinner,80"(2050mm)without spinner.
Wing Area: 1426 sq in(9202sq cm）
FLYING Weight: 15-16.8lbs(6800-7900g)
Features:
1. Light weight construction
2. Latest structure
3. High structual strength
4. Two pieces of removable wings
5. Super quality
6. Excellent aerobatics and 3D performance
7. Easy installation
8. Fully symmetrical aerofoil tail wing
9.Complete accessories
10. High performance hardware including: Ball linkate control system; PU wheels;C.F.Tube; Anodized Aluminum long arms, Carbon Landing gear; safe servos stapers;
Professional designed for 3D and precision aerobatics.Cowl with cowl ring,No exterior screws exposed ;Removable wings;
Pre mounted and painted Canopy;
Carbon Fiber accessories:
Carbon Fiber wing tube include
Carbon Fiber tail wing tube include
Carbon Fiber landing gear include
Carbon Fiber tail wheel include
Length:84"(2150mm)with spinner,80"(2050mm)without spinner.
Wing Area: 1426 sq in(9202sq cm）
FLYING Weight: 15-16.8lbs(6800-7900g)
Features:
1. Light weight construction
2. Latest structure
3. High structual strength
4. Two pieces of removable wings
5. Super quality
6. Excellent aerobatics and 3D performance
7. Easy installation
8. Fully symmetrical aerofoil tail wing
9.Complete accessories
10. High performance hardware including: Ball linkate control system; PU wheels;C.F.Tube; Anodized Aluminum long arms, Carbon Landing gear; safe servos stapers;
Professional designed for 3D and precision aerobatics.Cowl with cowl ring,No exterior screws exposed ;Removable wings;
Pre mounted and painted Canopy;
Carbon Fiber accessories:
Carbon Fiber wing tube include
Carbon Fiber tail wing tube include
Carbon Fiber landing gear include
Carbon Fiber tail wheel include
CARBON FIBER MAIN BLADE
700 mm Trex 700
600 mm Trex 600
550 mm for 30 size nitro helicopter
435 mm Trex 500
325mm Trex 450
HG830 GYRO
HG830 GYRO
The HG830 is a high performace, compact, light weight GYRO with AVCS and a Fuzzy PID control system designed for Model Helicopters. Because the sensor and control circuitry are integrated, it is simple to install. Gyro performance largely depends on the servos used, the higher the speed and response of the servos the better the Gyro sensitivity and perfomance. A high-speed digital servo (over 0.1sec/60ْ) is recommended. Features Fuzzy PID control System - Uses a control algorithm to reduce drift causing by temperature changes. AVCS System - Rudder trim changes are automatically corrected, tail (rudder) operation is simplified for improved 3D flight. Digital Servo compatible (DS mode) - DS mode is compatible with digital servos. Remote gain function - Remote gain function allows sensitivity switching from the transmitter. Mode switching function - Mode switching function allows AVS/normal gyro mode reversal. Limit trimmer - Sets the maximum travel of the rudder servo. Response-speed Trimmer - Sets the operation speed to fit different servos Integrated, Compact and lightweight - Compact size (25X25X19MM) and light weight (18g) utilize high density mounting technology Metal hard case – A metal hard case protects the Gyro from impact and improves EMC (electrostatic and electromagnetic interference) resistance. Specification Operating Voltage: DC 2.5 ~ 6.0V Operating Current: 8mA @ 5.0V Operating Temperature：-5℃ ~ +45℃ Dimension：25 x25 x19 mm Weight :18g
Super KDS Digital tail servo N590
The servos are high performance digital servo. They come with coreless motor and special alloy shell, which can send out the heat created when working to ensure the servo can work steadily. The servos adopts high strengt and high tenacity nylon gear. They feature low noise, smooth operating, and provide best operating efficiency. They can work as the swash servos and head lock servo for 500 size and smaller size helicopters.
KDS-N590
Speed: 0.08/60 4.8V 0.07/60 6.0V
Torque: 2.0kg/cm 4.8V 2.5kg/cm 6.0V
Operating frequency(Hz): 300
Dimension: 35.5mm x 15mm x 28.6mm
weight: 25g
KDS-N590
Speed: 0.08/60 4.8V 0.07/60 6.0V
Torque: 2.0kg/cm 4.8V 2.5kg/cm 6.0V
Operating frequency(Hz): 300
Dimension: 35.5mm x 15mm x 28.6mm
weight: 25g
KDS N290 Digital Servo
METAL GEAR (Cyclics)
KDS-N290 metal gear digital servo comes with high rigidity, unbreakable and impact resistance gear. It features a top ball-bearing for long life and positive centering It is most powerful servo among all KDS servos, and the torque can reach 2.2kg when at 6.0V. N290 was designed for higher performance 450 helicopters, electric park flyers, and 1/18 scale cars.
Torque at 4.8V: 1.8kg.cm(4.8V)
Torque at 6.0V: 2.2kg.cm(6.0V)
Speed at 4.8V: 0.14sec/60(4.8V)
Speed at 6.0V: 0.12sec/60(6.0V)
Voltage Rating : DC 4.8-6.0V
Working current: 180mA(4.8V)
Operating temperature: -20C to +60degC
Dimension: 24 x 12 x 24mm
A123 LIFE
Specs:
2300 mah - RX 2 cell 6.6volt - 2s1p
Max Discharge Continuous - 30c
Weight:150g
With Deans Connector
Pentium-40A： (linear mode BEC)：3A
●Pentium-40A-OPTO： None. Pentium-40A-OPTO is often used with an UBEC
●Pentium-40A-OPTO： None. Pentium-40A-OPTO is often used with an UBEC
450 Pro Brushless Motor For Helicopter
KV(rpm/v):3500
Running-Lignt Current(A):1.9
Ni-Mh Ni-Cd Battery(cell):9-12
Lipo Battery (cell):3-4
Max Permissible Current (A):38
Running Current (A):<28
Weight(g):55
Running-Lignt Current(A):1.9
Ni-Mh Ni-Cd Battery(cell):9-12
Lipo Battery (cell):3-4
Max Permissible Current (A):38
Running Current (A):<28
Weight(g):55
Shaft Diameter(mm):3.175
Transmitter Lipo Battery
Size : 111×25×22 mm Weight
: 180 g Plug Types
: JR&FUTABA Plug＋Balance Chargeable
Plug Applied to JR、FF9、EX10 etc transmitter
FAST FUELLER HAND FUEL PUMP
1. New generation fuel pump with compact size
2. Double injection, using TPR material that has a comfortable feel
3. Improved gear mesh and make the large flow rate 18cc/sec
4. Advanced pump unit design, glow fuels and gasoline are both compatible
5. Includes filter fuel nozzle and 19¡¨ silicon fuel tubing
1. New generation fuel pump with compact size
2. Double injection, using TPR material that has a comfortable feel
3. Improved gear mesh and make the large flow rate 18cc/sec
4. Advanced pump unit design, glow fuels and gasoline are both compatible
5. Includes filter fuel nozzle and 19¡¨ silicon fuel tubing